New Lubrication Service Forms

Student Info:

Full Name:*

Student ID:

Date:

Car Info:

VIN:

Year:

Make:

Model:

Trim:

Drive:

Engine Type/Size:

Odometer:

I. Determine the correct Filter Number, Oil Viscosity, and quantity of oil to be used

Filter #:

Viscosity:

API Service: ?

# of quarts:

Make sure the engine is warm. the hood opens. and check the oil level. Set the lift arms, check lift points raise the vehicle

II. Drain the oil and remove the Oil Filter

A. Inspect gasket. threads. and bolt head on drain plug

Condition:

B. Check for filter gasket stuck on engine (should be on old filter)

Instructor Check

C. Tighten (2-fingers tight) the Drain Plug with a wrench

D. Fill new oil filter ½ way with new oil. Apply coat of new oil to the Oil Filter Gasket

E. Install new Oil Filter -HAND TIGHT ONLY (NO TOOLS)

Instructor Check

III. Under Vehicle Safety Inspection and Servicing

A. Grease steering/suspension vehicle zerk fittings

# of fittings greased:

B. Check Differential fluid

OK or added fluid:

C. Oil Parking Break Cable

D. Exhaust and hangers

Condition:

E. Shocks/Struts

Condition:

F. Front end parts

Condition:

G. Springs

Condition:

Any leaks or other areas of concern?

If so, where?

IV. Lower vehicle completely to ground

A. Add oil using a funnel (DO NOT OVERFILL)

B. Start engine and watch/check the oil pressure light or gauge

# of seconds to achieve pressure:

Break Fluid:

Washer Fluid:

Transmission Fluid:

Coolant:

Power Steering Fluid:

Air Filter:

PCV

Belt(s):

Hoses:

VII. Accessory / System Operation

Wiper Inspection:

Wiper/Squirter Operation :

Lighting Front:

Lighting Back:

VIII. Clean UP

Put away all tools/equipment:

Remove/Park vehicle:

Clean floor, shop stall, work bay:

Keys returned to Frisbee/Dish:

Reset Oil Life Monitor:

Install window sticker:

TPMS Light on?:

New Lubrication Service Forms

Student Info:

Car Info:

I. Determine the correct Filter Number, Oil Viscosity, and quantity of oil to be used

II. Drain the oil and remove the Oil Filter

III. Under Vehicle Safety Inspection and Servicing

IV. Lower vehicle completely to ground

V. Tires: Visual inspection, tread depth, and tire pressure

- LF

- RF

- LR

- RR

VI. Under-hood inspections and Fluid Check

VII. Accessory / System Operation

VIII. Clean UP

Notes / Observations: